Schrijver
| Help me! FDD problems!
|
Repair-Bas
msx addict
Berichten: 380 |  Geplaatst: 16 Maart 2004, 17:40 |
Yes, ofcourse
The power supply gives 3 different voltages.
5 volt, 12 volt and -12V.
The drives need 5 volt and 12 volt.
If the 12 volt is missing the drives does not run.
Bas
|
|
Keitaro
msx friend
Berichten: 5 | Geplaatst: 16 Maart 2004, 18:23 |
Thanks again, I'll try to measure the voltage with my tester
|
|
Keitaro
msx friend
Berichten: 5 | Geplaatst: 17 Maart 2004, 17:14 |
I've measured the voltage of the 4-pin cables that is connected to the drive but it seems to be alright: +5V between the 1° and the 4° "wires" (is wire the correct word?) and +12 V between the 2° and the 4° and between the 3° and the 4° (if I remember exactly).
The problem isn't here... boh!
|
|
Repair-Bas
msx addict
Berichten: 380 | Geplaatst: 17 Maart 2004, 22:19 |
|
|
|
|
|
