Schrijver
| Switching cartridge port #2 to #1 in SVI-738
|
Algorythms
msx freak
Berichten: 175 |  Geplaatst: 06 Juni 2006, 23:01 |
To try Symbos on my 738 MSX 2 I need to have the IDE in cartridge port #1. The cartridge connector is #2 on SVI-738. I found a solution at Hanso's site from Nyrikki, but it didn't work on my msx. I didn't use a switch, I just swapped pin 3 and pin 38 on IC-35. Can it be that the Henrik Givad MSX2 rom doesn't work with it, or is it because I have a memory mapper installed? If anyone knows another way to do this please let me know. It's not only because of Symbos, some cartridge games doesn't work eighter.
|
|
NYYRIKKI
msx master
Berichten: 1525 | Geplaatst: 07 Juni 2006, 15:51 |
If you can get external memory mapper, check if it boots with it. It might be that you need different ROMs. At least ROM's made by Kari Lammassaari seem to work.
It could also help, if you could tell us your complete slot configuration. Just for you to know: Memory on this machine can not be put in slot 3-x without adding some more logic to mainboard. This is because slot switching does not work by default in #C000-#FFFF area on these slots.
|
|
|
|
|
