Schrijver
| OCM: questions and answers
|
caro
msx freak
Berichten: 138 |  Geplaatst: 29 Juni 2007, 07:40 |
Quote:
| So you should use MegaSCSI software to use it.
|
Tried, sform-2.com gives out the message:
" Something error happened!
... abort formatting "
|
|
manuel
msx guru
Berichten: 3448 | Geplaatst: 29 Juni 2007, 09:03 |
Did you do physical format?
|
|
Guillian
msx professional
Berichten: 633 | Geplaatst: 29 Juni 2007, 10:18 |
I format the cards on a PC with Windows and they work fine.
|
|
caro
msx freak
Berichten: 138 | Geplaatst: 29 Juni 2007, 10:49 |
Quote:
| Did you do physical format?
|
Yes, but only for check. |
|
caro
msx freak
Berichten: 138 | Geplaatst: 29 Juni 2007, 10:50 |
Quote:
| I format the cards on a PC with Windows and they work fine.
|
For me too works, but only first 22 Mb.
Programm cp.com (Partition changer for MEGA-SCSI) don't work. |
|
Guillian
msx professional
Berichten: 633 | Geplaatst: 29 Juni 2007, 11:21 |
What is the size of your card? 32MB?
Be sure you select "FAT" and not "FAT32" or whatever when you format the card on PC.
You don't need to use CP and/or partitions, since OCM supports FAT16. I tested 16MB, 256MB, 1GB and 2GB SD cards and they work without problem.
|
|
caro
msx freak
Berichten: 138 | Geplaatst: 29 Juni 2007, 12:11 |
Quote:
| What is the size of your card? 32MB?
|
128 and 256 MB, FAT16 formated, but the system sees only first 22 MB.
Quote:
| Be sure you select "FAT" and not "FAT32" or whatever when you format the card on PC.
|
It I understand.
Quote:
| You don't need to use CP and/or partitions, since OCM supports FAT16. I tested 16MB, 256MB, 1GB and 2GB SD cards and they work without problem.
|
Strange, and at me do not work  |
|
snout
msx legend
Berichten: 4991 | Geplaatst: 29 Juni 2007, 12:13 |
Perhaps, like with the CF interface, there are some cards that simply don't work well? Although I have not experienced any problems with either CF on MSX or SD on OCM myself it might be a cause. What brand and type of SD card are you currently using?
|
|
caro
msx freak
Berichten: 138 | Geplaatst: 29 Juni 2007, 13:28 |
Quote:
| What brand and type of SD card are you currently using?
|
I use cards of TRANSCEND and KINGSTON.
I do not think that in this case reason in the manufacturer of cards.
The card works, but its accessible volume is set by system.
By the way, whether is MSXDOS restriction on the size partition.
By the utility cp.com, the size of sections at emulation FD, gets out of a number:
720 KB, 1,44MB, 2.88MB, 5.76MB, 11.52MB and 23.04MB
Last number also is that size, which is given out by system in my case. |
|
Guillian
msx professional
Berichten: 633 | Geplaatst: 29 Juni 2007, 15:26 |
Are you using the COMMAND2.COM supplied with the OneChip?
|
|
NYYRIKKI
msx master
Berichten: 1510 | Geplaatst: 29 Juni 2007, 15:27 |
The CF card that caused my problems with IDE was made by Trancend. It was very strange. FAT12 partitions seemed to be working, but FAT16 partitions did not work. When I changed the card to SanDisk everything started to work.
|
|
caro
msx freak
Berichten: 138 | Geplaatst: 30 Juni 2007, 14:41 |
Quote:
| Are you using the COMMAND2.COM supplied with the OneChip?
|
Question interesting. And what COMMAND2.COM there should be any especial?
I work with OCM realized on base
Altera Cyclone II FPGA Starter Development Kit.
(www.altera.com/products/devkits/altera/kit-cyc2-2C20N.html)
At work I use the programs written down in an image megascsi.dsk
|
|
Latok
msx master
Berichten: 1727 | Geplaatst: 30 Juni 2007, 22:13 |
CF cards can be very strange. I have one who refuses to act as a slave device. It only works as master.
|
|
Edwin
msx professional
Berichten: 620 | Geplaatst: 01 Juli 2007, 00:38 |
Caro> A command2.com and msxdos2.sys needed for using fat16 is included on the CD.
|
|
snout
msx legend
Berichten: 4991 | Geplaatst: 01 Juli 2007, 00:40 |
That put aside, any other hardware device than the OCM itself might (at the end of the day) not exactly act the same as the OCM.
|
|
|
|
|
