Schrijver
| I have a msx2 NMS 8220 with a drawing program and I want...
|
Mundocombo
msx novice
Berichten: 22 |  Geplaatst: 07 Juni 2007, 00:07 |
Buf, esc key is working, but the program stills there... let's go straigt. How can I remove the eeprom, how can i locate it? I'm null at electronics.
I must pla "la abadia del crimen" now  |
|
sjoerd
msx addict
Berichten: 444 | Geplaatst: 07 Juni 2007, 08:55 |
do you press ESC at the right time? Press ESC, keep ESC pressed, turn on your computer, and keep ESC pressed until you see the msx basic screen.
|
|
mohai
msx lover
Berichten: 118 | Geplaatst: 07 Juni 2007, 16:31 |
If you want to remove the chip, you can get info where it is located here:
http://www.msxarchive.nl/pub/msx/mirrors/hanso/service_manuals/philipsnms8220sm.pdf
It is the one labeled "APLICATION ROM" / U13.
If it is inserted in a socket, then you can simply remove it VERY CAREFULLY, pulling gently with a small screwdriver from the short sides. It is not difficult, but you can damage the chip if some pin is broken... |
|
Mundocombo
msx novice
Berichten: 22 | Geplaatst: 10 Juni 2007, 19:15 |
done, it was labeled rom application v2.2
Thanks!
|
|
|
|
|
