http://romdb.vampier.net/download/softwaredb.zip

you can download the rom database unzip it in openmsx/share and it should work! I don't know where to put it in blueMSX. I didn't install it since I re-installed my laptop.

In blueMSX you can put the file in the Databases directory. Although the MegaFlashROMSCC works for Lotus F3 its better to use 'Manbow 2' as the mapper. I think the one in the database works fine too but you need to remove the sram file if the rom file would be updated (its just the way flashrom types work in bluemsx and the Manbow 2 mapper works like regular sram mappers)

talking about memory mappers...

Dvik: Now when you have finished your MSXdev07 entry, can you think implementing also DRAM mode on MSX tR emulation?

I just added all MSX DEV entires ever and re-uploaded the software database.

The mapper is changed to manbow2... which won't work on openMSX 0.6.3 official release but will work on the SNV version.

Oh, I thought on openMSX only the MegaFlashROMSCC mapper worked for Lotus F3 and not Manbow2. (Both need a recent SVN version.)

@NYYRIKKI, yes DRAM mode will be supported in the next blueMSX release. Btw, do you have any good software that requires DRAM mode?

Bifi's palette changer works with DRAM I believe.

You could test it with compass, it accepts the DRAM mode and you can switch between these models.

If memory serves me well, LOADCAS works better in turboR with DRAM mode (I think it only works in that mode, but I could be wrong). It was used to modify Basic on the fly to get the TAPE extensions and other stuff.