The Big MegaFlashROM SCC+ SD Topic | MSX Resource Center (Página 80/96)

Prophet (3516)

26-03-2017, 16:48

SkalTura wrote:

Does it make a difference if I used /H60 /O, in stead of /O / H60 ?
Because I tried it with /H60 /O a few weeks ago, and that didn't work...

It works fine here. I added /h50 and boots at 50 Hz on my turbo R (that boots at 60 Hz by default)

Por neoretro75

Supporter (5)

26-03-2017, 19:35

I'm trying to play to SD Snatcher. I tried with two different set of disk files launched via the MFR SCC+ SD.

- The first set: the game runs properly but there is no sound
- The second set: when booting, I get a japanese message which basically states that I have to set the sound cartridge.

What is the right procedure to get the sound for this game? Thanks in advance for your help.

Por meits

Scribe (6535)

26-03-2017, 19:48

Somewhere in this big topic it says you should keep S pressed to activate the SCC

Por neoretro75

Supporter (5)

26-03-2017, 21:03

Meits, thanks for the input. It didn't work for me or maybe I made something wrong because, now, whatever the disk set I launch for SD Snatcher, I get a blue screen after rebooting. Only for this game. The others .dsk games run well.

Por neoretro75

Supporter (5)

26-03-2017, 21:27

Meits, it works now, thanks again for your help! I had to erase the SD card once and put again the files to make it work.

Por SkalTura

Champion (399)

27-03-2017, 09:54

Guillian wrote:

It works fine here. I added /h50 and boots at 50 Hz on my turbo R (that boots at 60 Hz by default)

Doesn't work for my Sony HBF-700P (modified to MSX2+)...

Por Guillian

Prophet (3516)

27-03-2017, 11:38

SkalTura wrote:

Doesn't work for my Sony HBF-700P (modified to MSX2+)...

That's weird.
It works fine on openMSX (Sony HB-F700P). It boots at 50Hz and then the MultiROM menu is at 60 Hz. So the /H60 option is working.

Tested also in NMS8245, NMS8250, VG8235...

What OPFXSD version are you using?
Are you using /H50 in any of the multirom games?

Por SkalTura

Champion (399)

28-03-2017, 14:10

Guillian wrote:

What OPFXSD version are you using?
Are you using /H50 in any of the multirom games?

Not sure what the version of OPFXSD is, where can I see that ?
Some games use /U, but no /H50 or /H60 behind any of the games in the MULTIROM.OPF file...

Por Guillian

Prophet (3516)

28-03-2017, 14:48

You can check the version just typing OPFXSD.

The /U option can be the reason of you problems. When you use /U, the cartridge disables the subslots and resets the MSX. So the BIOS will set the default video mode again.

Por SkalTura

Champion (399)

28-03-2017, 15:43

But even if the /U is used only for some games, and not for the multirom itself, it should boot in 60Hz when I load the multirom into the card using /H60 correct ?