Zemmix Neo project in Korea. (OCM based Zemmix with CNCed case)

Página 53/60
46 | 47 | 48 | 49 | 50 | 51 | 52 | | 54 | 55 | 56 | 57 | 58

Por luppie

Paladin (869)

Imagen del luppie

21-09-2013, 18:02

Today I've 'modded' my Zemmix Neo.
I loved the picture of the special edition with the extra lights, so I've added the to my Neo.

I used a piece of perspex plastic to add an extra layer that lights up using 2 RGB Led's Big smile

Movie of my Neo in action.

Por KdL

Paragon (1447)

Imagen del KdL

21-09-2013, 23:59

LOL! Smile

Por MSX4ever

Master (248)

Imagen del MSX4ever

22-09-2013, 15:00

really nice and professional.

Por mygodess

Champion (275)

Imagen del mygodess

23-09-2013, 06:37

@luppie
Looks good Smile I think you may add a little plastic on bottom of switch also Smile

Por luppie

Paladin (869)

Imagen del luppie

23-09-2013, 11:32

Thank you mygodess.
What do you mean with the bottem of the switch?

I also looked if I could make it also on the bottem of the Neo, but this is a bit harder to acomplished, because of the sides of the Neo are mounted on the bottemplate.

Por mygodess

Champion (275)

Imagen del mygodess

23-09-2013, 17:40

I meant just the switch itself. There must be 2-3mm (height of Transparent Plastic) space from
upper cover switch to PCB switch because you added plastic between upper cover and middle cover.
Anyways, did you got the present? I hope you like it Smile

Por luppie

Paladin (869)

Imagen del luppie

23-09-2013, 17:50

Ohh ok, that was no problem, the original switches are still working withou adding some extra hight to them.
I received your present, still have to unpack it Wink

Por spl

Paragon (1470)

Imagen del spl

03-10-2013, 16:08

Does the new Firmware have the Zemmix logo boot?

Por mygodess

Champion (275)

Imagen del mygodess

04-10-2013, 02:36

@spl.
This is the 3.2rc5 firmware with Zemmix Neo Logo.
3.2RC5 with Logo

Por MSX4ever

Master (248)

Imagen del MSX4ever

04-10-2013, 19:42

@mygodess
I have flash it, but still the MSX Logo ?

Regards,
MSX4ever

Página 53/60
46 | 47 | 48 | 49 | 50 | 51 | 52 | | 54 | 55 | 56 | 57 | 58