SD v2.2 interface | MSX Resource Center (Página 18/44)

Champion (324)

05-07-2009, 15:01

sorry no, the 2.2 as seen on the pictures in this thread and on my website is not prepared for SCC chip.
However I can do a custom job of putting a cpld and flashrom on a konami pcb to make an SD interface of it. You can allways email me if you want to know more details

Por roadfighter

Champion (467)

05-07-2009, 17:20

I have my SD cardtridge and it works fine, but i also put on some sunglasses when using the SD cart. because the LED are so brite

Por Leo

Paragon (1236)

05-07-2009, 17:43

a 10k resistor may help

Por OeiOeiVogeltje

Paragon (1438)

05-07-2009, 20:09

sorry no, the 2.2 as seen on the pictures in this thread and on my website is not prepared for SCC chip.
However I can do a custom job of putting a cpld and flashrom on a konami pcb to make an SD interface of it. You can allways email me if you want to know more details

this sounds interesting to me too!

is there a possibility to order a DIY package? (with instructions)

it will keep me off the streets !!!!

Por Erikie

Champion (324)

05-07-2009, 21:56

don't think it will be an easy job to add a cpld to an existing konami pcb.
It is way harder then building the v2.2 shown on page 4.
As you need to solder wires to a plcc chip which is not easy.

Por OeiOeiVogeltje

Paragon (1438)

05-07-2009, 22:39

ill take that risk...

Por Leo

Paragon (1236)

06-07-2009, 14:11

by the way there is cpld and SDcard connector, why dont you take out scc chip and put it into new design ?

Por usuario_msx2

Paladin (763)

06-07-2009, 15:52

don't think it will be an easy job to add a cpld to an existing konami pcb.
It is way harder then building the v2.2 shown on page 4.

Why not?
here you are

ill take that risk...
good for you, I did it

es.geocities.com/usuario_msx2/CPLDSCCMMC.JPG