Home » Forum » MSX Talk » Hardware » 1chip msx sd card

1chip msx sd card

By GUNMA747J

Expert (100)

GUNMA747J's picture

03-03-2019, 04:26

hi,i have a 2 GB micro sd card but it labels as a class 6 speed,will it be too fast for the sd card reader for the 1 chip? thanks.

Login or register to post comments

By sdsnatcher73

Enlighted (4319)

sdsnatcher73's picture

03-03-2019, 06:23

It should work just fine, the OCM will read from it at the speed it can handle.
Even through it is a 2GB card you must check if it is original SD or later SDHC (high capacity) standard. Depending on the firmware in your OCM it will be able to use only SD type (KdL added SDHC support in version 3.3)

By GUNMA747J

Expert (100)

GUNMA747J's picture

03-03-2019, 09:12

Cool!Thanks a lot!By the way,how can i check the OCM firmware version?,cause the 1 chip are my friend's.Thanks