One chip MSX improvement project

Page 118/121
111 | 112 | 113 | 114 | 115 | 116 | 117 | | 119 | 120 | 121

By sdsnatcher73

Prophet (3545)

sdsnatcher73's picture

04-06-2021, 17:52

Thanks KdL and HRA for all the great work. I can wait for the 3.9 release for this fix with the RESET timing. I was just playing around a bit with my VGM collection and can switch to another machine easily.

By HRA!

Champion (282)

HRA!'s picture

12-08-2021, 15:34

https://github.com/hra1129/one-chip-msx-kai

OCM改 for "DE0CV+DEOCM" has been updated.
The autofire function has been added.

[CTRL]+[SHIFT]+[PageUp/Dn] ... Toggle autofire ON/OFF
[CTRL]+[PageUp] ... Speed up for autofire
[CTRL]+[PageDn] ... Speed down for autofire

By konamiman

Paragon (1176)

konamiman's picture

12-08-2021, 16:54

Autofire? Awesome! Where did you get the idea from? ;-)

By HRA!

Champion (282)

HRA!'s picture

12-08-2021, 23:20

Autofire is a request from Konamiman.
I also included it because it is standard in A1ST/A1GT and is realized as a function of S1990.

By AxelStone

Prophet (3149)

AxelStone's picture

13-08-2021, 08:52

It should be great to have it ported to Zemmix firmware also Smile

By HRA!

Champion (282)

HRA!'s picture

13-08-2021, 15:32

autofire will be integrated into OCM-PLD3.9.
Unfortunately, it is limited to 2nd generation devices due to FPGA space constraints.
The second generation devices are SM-X and SX-2 that use Cyclone IV.

By KdL

Paragon (1448)

KdL's picture

22-08-2021, 14:19

Currently the space used in first generation machines such as Zemmix Neo is 100%. Some experimental features have already been removed to make room for more important things. Autofire can only be achieved if we can reshape and compress the current firmware even better. I do not rule out that it may happen in the future but for the moment it has remained out.

By KdL

Paragon (1448)

KdL's picture

22-08-2021, 14:20

konamiman wrote:

Autofire? Awesome! Where did you get the idea from? ;-)

u! Running Naked in a Field of Flowers

By HRA!

Champion (282)

HRA!'s picture

30-04-2022, 00:55

I have a problem with some PS/2 keyboards that are not behaving properly.
I have found several problems with ESEPS2.
I am currently reworking the ESEPS2 module to remedy this problem. Wink

By mpsantos7

Supporter (4)

mpsantos7's picture

18-08-2022, 05:15

Hello,

Is possible in the future make country localization of the chars tables ? (like spanish, portuguese,...)

I have a SMX-HB and ps/2 keyboard is working fine after a update made by ducasp.

It is really a nice board. Thanks by your work.

Page 118/121
111 | 112 | 113 | 114 | 115 | 116 | 117 | | 119 | 120 | 121