One chip MSX improvement project

Page 119/123
112 | 113 | 114 | 115 | 116 | 117 | 118 | | 120 | 121 | 122 | 123

By sdsnatcher73

Prophet (3660)

sdsnatcher73's picture

25-09-2022, 11:16

I wonder with Nishi already supporting the efforts of KdL (and those of HRA as well I assume), is it still necessary to have SD-BIOS as private link?

Either way, nice update again for our MSX++ computers Wink

By msd

Paragon (1508)

msd's picture

26-09-2022, 12:04

What's new in this update? This needs a front page news item !

By KdL

Paragon (1447)

KdL's picture

26-09-2022, 14:48

msd wrote:

What's new in this update? This needs a front page news item !

It will be listed on MRC shortly but you can read the history.txt, there is a year of work. It is also the most tested firmware ever.

By selios2000

Hero (550)

selios2000's picture

27-09-2022, 10:45

I don't know if my Zemmix Neo is Korean or Brazilian.
It doesn't matter which firmware do I use to update it?

By AxelStone

Prophet (3176)

AxelStone's picture

27-09-2022, 13:30

I've the feeling that the logo is broken for Zemmix? I've tried general firmware and Brazilian firmware with this result:

Someone with the old firmware can confirm? thanks

By Parn

Paladin (809)

Parn's picture

27-09-2022, 14:01

selios2000 wrote:

I don't know if my Zemmix Neo is Korean or Brazilian.
It doesn't matter which firmware do I use to update it?

It doesn't matter, both use the same firmware. Strike that. If your Zemmix Neo has a Korean logo on top of it (see @AxelStone's picture), it is a Korean Zemmix Neo. Brazilian Zemmix Neos have plastic cases. You can see pictures of them in the corresponding Wiki page.

AxelStone wrote:

I've the feeling that the logo is broken for Zemmix?

It isn't broken, that's how the Korean Zemmix Neo logo looks. It's supposed to be a stylized 재믹스.

By AxelStone

Prophet (3176)

AxelStone's picture

27-09-2022, 15:20

@Parn You are right, flashing de zemmixbr firmware you can see the other logo. In truth I think you can even flash SX1 firmware, this point should be confirmed by KdL or HRA.

Thanks.

By AxelStone

Prophet (3176)

AxelStone's picture

28-09-2022, 07:44

One question, Is the 2nd PSG available on 1st gen machines (OCM, Zemmix, SX1...)? In that case, which software use it?

Thanks.

By KdL

Paragon (1447)

KdL's picture

28-09-2022, 13:04

AxelStone wrote:

@Parn You are right, flashing de zemmixbr firmware you can see the other logo. In truth I think you can even flash SX1 firmware, this point should be confirmed by KdL or HRA.

Thanks.

In the photo you have the Zemmix Neo Korean logo.

There are three logos for Zemmix Neo:
Zemmix Neo Korean, Zemmix Neo Brazilian and SX-1.

These three firmware are all the same even if the logo changes because it is part of EPBIOS.

Only 1chipMSX and SX-1 Mini use separate firmware from Zemmix Neo. Read the details.txt to know the interchangeability groups, it is also written in previous versions.

Page 119/123
112 | 113 | 114 | 115 | 116 | 117 | 118 | | 120 | 121 | 122 | 123