WTB SD/MMC Card/Cartridge for MSX2/2+ | MSX Resource Center (Page 1/2)

By Leo

Paragon (1236)

02-01-2011, 19:15

you mean SD card INTERFACE ?

By coldbreeze

Master (141)

03-01-2011, 00:55

Indeed.

By Leo

Paragon (1236)

03-01-2011, 19:54

how much ram has your MSX ? if it is an MSX2+ with only 64kb it is interesting to tell.

By coldbreeze

Master (141)

04-01-2011, 11:29

Hi Leo, I have a few MSX/MSX2/MSX2+ machines. I would like to use the SD interface on my Turbo-R GT. It has 512k of RAM.

By coldbreeze

Master (141)

04-01-2011, 11:34

I also have an LPE-4MB-V3 Leonardo Padial's memory expansion card...

By Huey

Prophet (2696)

04-01-2011, 16:00

Make sure not to buy a SD/MMC interface V2.x from Erikie (the one without SCC chip). It has problems running in R800 mode (diskman e.g. locks up).
His V1.x SD/MMC interface works perfectly on a turbo-R

Any other SC/MMC (sharksym and padial?) do not seem to have this problem.

By Leo

Paragon (1236)

04-01-2011, 18:50

Make sure not to buy a SD/MMC interface V2.x from Erikie (the one without SCC chip). It has problems running in R800 mode (diskman e.g. locks up).
His V1.x SD/MMC interface works perfectly on a turbo-R

Any other SC/MMC (sharksym and padial?) do not seem to have this problem.

you can buy that interface even on turbo R , the bug is fixed after bios v4.03