New battery for NMS8250

Rookie (26)

13-08-2021, 10:23

My msx doesn’t save time and date settings, because the battery doesn’t charge anymore. I found a replacement battery of this kind on this site. https://www.pilesminute.com/1060-sanyo-11-x-505-n-50-sb3-36v...

But before i fuck things up.. how do i replace it? Do i cut the wires, desoler the left-over wires, and put the new one in? Or do i desolder the old with the wires stil connected and and solder the new one on?

I’m asking this because i don’t have special solder stuff for small electronics and i don’t want to kill my msx.

!login ou Inscrivez-vous pour poster

Par edoz

Prophet (2482)

13-08-2021, 10:34

I think i should cut the wires and attach the battery to it without desoldering it from the motherboard to avoid damage on the motherboard.

Par Augusteijn

Rookie (24)

13-08-2021, 12:02

I personally would choose your first method, it is more solid. Don’t worry about the motherboard, but remember to have your soldering iron at medium temperature. Don’t use an iron without temperature control. I have soldered a lot on these 8250 series, just recently, and never experienced problems with damage

Par meits

Scribe (6544)

13-08-2021, 16:39

I've done quite a few of those just recently.

Be sure to cut out D130.
Be very careful with the solder pads. They come loose very easily.

Par herres88

Rookie (26)

14-08-2021, 20:00

I’ll let it get done. I’m to scared i will ruin shit.

Par SkalTura

Champion (401)

25-08-2021, 12:46

Where do you live herres88...?
Should you live near Tilburg in the Netherlands, I have over 35 years of experience soldering, and would be glad to help...

Par meits

Scribe (6544)

25-08-2021, 14:55

You can always mail the mainboard to someone

Par siddy6581

Master (179)

25-08-2021, 22:50

I'm curious. What could happen if you just cut out the battery but leave the space empty?

Par S0urceror

Master (210)

26-08-2021, 20:43

The MSX still works but it doesn’t remember at startup the date/time, 40/80 column mode, colors, etc. I know because I have it removed myself. Better to be careful. Although I like Meits’s approach.

Par meits

Scribe (6544)

26-08-2021, 21:25

I took that method from hardware master Omega.

Par siddy6581

Master (179)

26-08-2021, 23:25

Which one is the D130?