Korean MSX enthousiast Painkilla has revealed the first images of M-Pack, a One Chip MSX clone so small that it fits in a casing no larger than a Konami MSX cartridge. Contrary to the already small Mini OCM, this Micro One Chip MSX lacks a cartridge port.
Furthermore, all output is going through a single 24pin TTA connector (which you might know from the Gamepark GP2X), so additional cables are needed to hook up speakers and a display device. A dedicated transfer cable will be revealed in the near future.
Last but not least, the M-Pack is not only cartridge-sized, it also features an MSX slot connector, suggesting it can be plugged into any MSX computer. Needless to say, this might open up an impressive range of FPGA based MSX hardware extensions, all from a single all in one cartridge.
Relevant link: M-Pack announcement
Comments (14)
By ray2day
Paladin (743)
17-04-2013, 20:26
By Vampier
Prophet (2413)
17-04-2013, 20:44
By snout
Ascended (15187)
17-04-2013, 21:04
By rogermm
Master (130)
17-04-2013, 22:09
By meits
Scribe (6544)
17-04-2013, 22:19
By MicroTech
Champion (388)
18-04-2013, 09:16
By Lord_Zett
Paladin (807)
18-04-2013, 12:59
By Dreamerm42
Hero (625)
18-04-2013, 13:17
By _ThEcRoW
Master (145)
18-04-2013, 16:10
By Gradius2
Hero (652)
18-04-2013, 18:35
By snout
Ascended (15187)
18-04-2013, 18:58
By Paulbrk
Hero (611)
19-04-2013, 08:16
By msxholder
Champion (399)
22-04-2013, 00:34
By syn
Prophet (2123)
17-04-2016, 00:54